When You Need Faucet Installation or Repair
If your faucet is dripping, leaking at the base, or difficult to operate, it is time for repair or replacement. A single dripping faucet can waste over 3,000 gallons of water per year — that is water you are paying for and water that may be causing hidden damage to your sink cabinet.
Faucet replacement is also a common upgrade during kitchen and bathroom remodels. Modern faucets offer pull-down sprayers, touchless operation, and finishes that resist water spots and fingerprints.
We handle faucet installation and repair for kitchen sinks, bathroom sinks, utility sinks, and outdoor spigots. We also install garbage disposals and connect dishwashers as part of kitchen plumbing upgrades.
Typical Scope and Cost Range for Faucet Installation and Repair
Faucet replacement is typically a flat-rate job that includes removing the old faucet, cleaning the sink surface, installing the new faucet, and connecting the supply lines. The price varies based on accessibility — a faucet in a cramped vanity cabinet takes longer than a standard open-under countertop.
Repairs are usually billed by the task: replacing a cartridge, O-ring, or aerator. Many leaks are caused by a worn-out cartridge that costs a few dollars and takes about 30 minutes to replace. We diagnose the issue before quoting the repair.
We check shut-off valves under the sink as part of every installation. If the valves are stuck or leaking, we flag them before proceeding, because attempting to close a failed shut-off valve can cause flooding.
- Faucet replacement is faster if the new faucet uses the same hole configuration as the old one
- Supply lines should be replaced when installing a new faucet — old lines can leak at the connection
- Touchless faucets require a power source (batteries or hardwired) near the sink
- Outdoor spigot repair is common after winter freezes — we can replace the vacuum breaker or the entire spigot
Materials, Tools, and Prep That Affect Results
The faucet quality determines how long the installation lasts. Budget faucets use plastic components that wear out quickly, while mid-range and premium faucets use brass and ceramic disc valves that last for years. We recommend investing in a quality faucet, especially for kitchen sinks that see daily use.
The condition of the existing plumbing affects the installation. Old galvanized supply pipes may need to be replaced with braided stainless steel supply lines. Corroded shut-off valves should be replaced before a new faucet is connected.
For undermount sink installations, reaching the mounting nuts requires a basin wrench and sometimes a mirror to see behind the sink. We bring the tools needed for any sink configuration.
Common Mistakes Homeowners Make
The most common mistake is not checking the sink hole configuration before buying a new faucet. Some sinks have three holes, some have one, and some have four. A faucet designed for a single-hole installation will not work on a three-hole sink without a deck plate.
Another frequent issue is over-tightening the connections. Hand-tight plus a quarter turn with a wrench is usually sufficient for compression fittings. Over-tightening can crack plastic nuts or deform washers, creating a leak where there was none before.
Some homeowners also forget to flush the supply lines before connecting the new faucet. Sediment in the lines can clog the new faucet's aerator or cartridge within days of installation. A quick flush prevents this.
How to Choose a Reliable Local Pro
Ask whether the installer includes replacement of the supply lines and shut-off valve check in the quoted price. Reusing old supply lines with a new faucet is risky — they may leak at the connection point.
Look for a handyman who carries common replacement parts like cartridges, supply lines, and shut-off valves. Having the right parts on hand means fewer trips to the hardware store and faster completion.
Local experience matters because older Salt Lake County homes may have galvanized or polybutylene supply pipes that require special handling. A plumber who has worked with all pipe types knows how to connect a modern faucet safely.
Next Steps for Your Faucet Project
If you have a new faucet ready to install, send us photos of the sink area, the existing faucet, and the underside of the sink. This helps us determine what tools and supplies to bring. If you need help selecting a faucet, we can advise on compatible styles.
We serve homeowners across Salt Lake County with faucet installation, repair, and kitchen plumbing upgrades. Reach out through our contact form to schedule.
For related plumbing services, check our plumbing fixture upgrades page for complete scope details.
Need repair help fast?
Tell us your project details, location, and symptoms. We’ll follow up quickly to confirm scope and scheduling.